5.2
Configuring transmission settings
5.2
Configuring transmission settings
Press the , key in the E-mail address entry screen to configure the following transmission settings.
-
Transmission time
-
Maximum transmission size
-
Maximum transmission resolution
-
Compression coding method
To specify the transmission time, select [TIMER SETTING]. To specify the maximum transmission size, max-
imum transmission resolution, and compression coding method, select [BASIC/ADVANCED].
5.2.1
Specifying the transmission time
d
Reference
For details on the basic transmission procedure, refer to page 5-4.
1
Load the original, and specify a destination.
2
Press the , key.
3
Use the +/, key to select [TIMER SETTING], then press the OK key.
4
Enter the transmission time using the Keypad, then press the OK key.
5
Press the Back key.
This returns to the E-mail address entry screen.
5.2.2
Selecting the Basic or Advanced mode
d
Reference
For details on the basic transmission procedure, refer to page 5-4.
1
Load the original, and specify a destination.
2
Press the , key.
3
Use the +/, key to select [BASIC/ADVANCED], then press the OK key.
4
Use the +/, key to select [BASIC] or [ADVANCED], then press the OK key.
% Selecting [BASIC] returns to the FAX OTHER SETTING screen.
% If [BASIC] is selected, each item is set as shown below.
[MAX TX SIZE]: [A4]
[MAX QUALITY]: [FINE]
[BW CODING METHOD]: [MH]
% If you select [ADVANCED], go to a desired step in page p. 5-8.
bizhub 306/266
FAX OTHER SETTINGS
TIMER
5
5-7