Rear Window Wiper And Washer; Headlight Washer - Mazda CX-3 Owner's Manual

Rear Window Wiper and
Washer
The ignition must be switched ON to use
the wiper.
▼ Rear Window Wiper
Turn the wiper on by turning the rear
wiper/washer switch.
Switch Position
Wiper operation
Type Type
No.
A B
Stop
Intermittent
Normal
▼ Rear Window Washer
To spray washer fluid, turn the rear wiper/
washer switch to either of the
After the switch is released, the washer
will stop.
If the washer does not work, inspect the
fluid level (page 6-32). If the fluid level
is normal and the washer still does not
work, consult an expert repairer (we
recommend an Authorised Mazda
Repairer).
CX-3_8GT4-EE-18D_Edition8_old
Switches and Controls

Headlight Washer

The engine must be started and the
headlights must be turned on.
If you want to operate headlight washers,
double flick the wiper lever.
NOTE
When the windscreen washer is
operated for the first time after turning
on the headlights, the headlight washers
operate automatically.
If air enters the headlight washer fluid
pipe under conditions such as when the
vehicle is brand-new or after an empty
washer tank is replenished with washer
fluid, washer fluid will not spray even
when the wiper lever is operated. If this
occurs, perform the following
procedure:
1. Start the engine.
2. Turn on the headlights.
position.
3. Double flick the wiper lever several
times until the washer fluid sprays.
When Driving
*
OFF
Washer
4-73
*Some models.
2019-11-14 12:53:52