This option allows the OS (hypervisor) to control the node power. Many customers prefer this setting as it
saves on OPEX.
Use the Lenovo ToolsCenter Suite CLI program or other means to set the power performance bias to
"OS Controlled":
onecli config set Power.PowerPerformanceBias "OS Controlled"
Modify boot options
Use the Lenovo ToolsCenter Suite CLI program or other means to configure the boot order as follows:
1. CD/DVD Rom
2. Hard Disk 0
3. PXE Network
onecli config set BootOrder.BootOrder="Legacy Only=CD/DVD Rom=Hard Disk 0=PXE Network"
46
HX1310, HX2310-E, HX3310, HX3310-F Installation and Service Guide