Lenovo HX1310 Installation And Service Manual page 178

b. Align the installation tool with the microprocessor socket. The installation tool rests flush on
the socket only if properly aligned.
Figure 93. Installation tool alignment
c. Install the microprocessor using the following instructions for your installation tool.
• When using the installation tool, twist the handle of the installation tool assembly
counterclockwise until the microprocessor is inserted into the socket, and lift the installation
tool out of the socket.
Figure 94. Installation tool handle adjustment
164
HX1310, HX2310-E, HX3310, HX3310-F Installation and Service Guide
Handle
Microprocessor
Installation tool