Lenovo HX1310 Installation And Service Manual page 35

Air baffle
Fan filler
Fan
SATADOM bracket
SATADOM
SATADOM holder
Battery holder
Four 2.5-inch hot-swap
backplane assembly
2.5-inch hard disk
drive filler
2.5-inch hot-swap
hard disk drive
DVD drive
filler
Figure 13. Server components
Blue on a component indicates touch points, where you can grip the component to remove it from or install
it in the server, open or close a latch, and so on.
Orange on a component or an orange label on or near a component indicates that the component can be
hot-swapped, which means that if the server and operating system support hot-swap capability, you can
remove or install the component while the server is running. Orange can also indicate touch points on
Advanced media
cage for eight
2.5-inch-drive
model
Cover
Standard media
cage for eight
2.5-inch-drive
model
.
Chapter 1 The Lenovo Converged HX Series server
Power supply
filler
Heat sink
Microprocessor
System board
Memory
1U PCIe Riser 2
assembly (2 x low
profile; x8 or x16)
1U PCIe Riser 1
assembly (1x low
profile; x16)
1U PCIe Riser 2
assembly (1x
full-height half-length
and 1x low profile; x8
or x16)
Chassis
LCD system
information
display panel
Simple media
cage for eight
2.5-inch-drive
model
21