Lenovo HX1310 Installation And Service Manual page 180

Step 7. Remove the microprocessor cover, tape, or label from the surface of the microprocessor socket, if
one is present. Store the cover in a safe place.
Figure 97. Socket cover removal
Attention: When you handle static-sensitive devices, take precautions to avoid damage from static
electricity. For details about handling these devices, see "Handling static-sensitive devices" on
page 102.
Step 8. Close the microprocessor socket release levers and retainer:
Figure 98. Microprocessor socket levers and retainer engagement
a. Close the microprocessor retainer on the microprocessor socket.
b. Identify which release lever is labeled as the first release lever to close and close it.
c. Close the second release lever on the microprocessor socket.
Step 9. Install the heat sink.
166
HX1310, HX2310-E, HX3310, HX3310-F Installation and Service Guide
release lever
Microprocessor
release lever