Step 1.
Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 100.
Step 2.
Turn off the server and peripheral devices and disconnect the power cords and all external cables.
Step 3.
Remove the cover (see "Removing the cover" on page 104).
Step 4.
Install the SATADOM to the holder as shown.
Figure 112. SATADOM installation
Step 5.
Install the SATADOM bracket in the direction as shown until the release latch clicks into place.
Figure 113. SATADOM bracket installation
.
Chapter 5
Removing and replacing components
177