Table of Contents
Advertisement
7. EQ100 Settings
3) In the [Add Connection Device] dialog box, enter registration items for the connection
device.
Item
Name
Type
Host Unit
Item
Connection
Device Address
4) Clicking [OK] adds the connection device to the list.
Enter a name of the connection device. If not entered,
"model"+"#"+"connection device address" is automatically set.
<Input range> Half-width63 characters (Full-width 20 characters, more
or less)
A list of connection device types appears. Select a connection device
type.
- For a wireless unit master, select [WZ-MLAN01].
- For a wireless unit slave (CompoWay/F), select [WZ-SRS01].
Select an upstream destination for the connection device.
- For a wireless unit master, select [LAN].
- For a wireless unit slave (CompoWay/F), select a device name of the
wireless unit master to connect.
Enter an address of the connection device selected in the connection
device type.
Details depend on a selected connection device type.
- For a wireless unit master, enter an IP address and a port number.
- For a wireless unit slave (CompoWay/F), enter a wireless unit ID.
Description
Description
7-8
Advertisement
Table of Contents
