Table of Contents
Advertisement
1. Overview of EQ100
■Project to be Created by EQ-Manager
To run EQ100 and EQ server, a project must be created by EQ-Manager and written to EQ100
and EQ server respectively.
There are following two types of projects:
Project Name
EQ Project
EQ Server Project
Reference
- For details of EQ-Viewer, see "EQ-Viewer User's Manual"(catalog No. : N198-E1-01).
A project that describes operation settings of EQ100.
An EQ project performs measured data collecting setting from a
measurement device to EQ100 and EQ100 monitoring setting
(the measurement device and its channel are registered in the
collecting setting).
If there are more than one EQ100, a project must be created for
each EQ100.
A project that describes operation settings of EQ server. An EQ
server project performs setting of collecting from EQ100 to EQ
server and monitoring setting on EQ server. In the collecting
setting, EQ100 must be registered. A channel must be loaded by
the corresponding EQ project or actual EQ100.
If there are more than one EQ100, settings of multiple EQ100s
are done in one EQ server project.
Description
1-4
Advertisement
Table of Contents
