Table of Contents
Advertisement
7. EQ100 Settings
■Deleting Measurement Device
1) In the [Measurement Device Registration] screen, select the [Select] check box.
2) Click [Delete].
3) In the confirmation dialog box, click [Yes] if you are sure.
Precautions for
Correct Use
- Deleting a measurement device deletes its channels that are registered as well.
■Enabling/Disabling Logging
You can stop logging from a measurement device while keeping the measurement device
registration as it is.
1) In the [Measurement Device Registration] screen, change the setting of enabling/disabling
[Logging].
Setting Item
Logging
En (Enable): Collecting from the measurement device is available.
Dis (Disable): Collecting is not done from the measurement device even if
Description
the logging is started.
7-19
Advertisement
Table of Contents
