Table of Contents
Advertisement
7. EQ100 Settings
●Setting Example of Operation Channel (Creating Free Operation Channel from EQ100
General-Purpose Input)
The number of pulses from the EQ100 input terminal is counted and a pulse input count
channel is automatically generated. A free operation channel created based on the count can
convert units to engineering units (e.g. energy data) such as flow rate and electric energy.
Pulse
General-
Purpose Input
Count
In this case, the following conversion is performed:
Conversion: Converted value = A x Pulse input count
A: Weight per 1 pulse (coefficient)
After the decimal point: Specify the number of digits after the decimal point of the value
after conversion.
Unit: User-specified unit (Set by creating the data type)
e.g.) For electric power of 10 kWh per 1 pulse
Unit: kWh
Coefficient: 10 (/pulse)
Reference
- Pulse input count from a measurement device e.g. the KM series can be converted by an
operation expression as with EQ100 pulse input count.
Reference
- Electric energy converted from the pulse input count based on the EQ100 conversion setting
can be displayed as a graph on the Web UI screen and EQ-GraphViewer.
General-Purpose Input
x 1
Measurement Channel
Pulse Input Count
Channel
EQ100
Operation Channel
Pulse
Pulse Converted Value
Conversion
(Industrial units e.g. flow rate, total
power consumption)
7-31
Advertisement
Table of Contents
