Table of Contents
Advertisement
7. EQ100 Settings
10) If the EQ project name written in EQ100 differs from the EQ project name to write, the
following confirmation dialog box appears. If you are sure to write, click [OK].
11) When the EQ project is written in EQ100, the following dialog box appears. The detail of the
dialog box depends on the settings.
●If restart of EQ100 is not required
When writing is completed, a message "Completed to write the setting." appears. Click
[OK].
●If restart of EQ100 is required
When writing is completed, a message "Completed to write the setting. To reflect the setting,
reboot EQ100. Are you sure you want to reboot now? " appears. Click [Yes].
EQ-Manager and EQ100 transition to offline. EQ100 is restarted and the setting is
reflected.
Precautions
- The written EQ project file is required to edit an EQ project later for a change of configuration,
etc. Keep it for later edit.
12) Change the computer's IP address back.
7-73
Advertisement
Table of Contents
