Table of Contents
Advertisement
7. EQ100 Settings
Shown below are button functions:
Button
■Adding Channel Group
1) To add a channel group, Click [+Top].
2) In the [Add Group] dialog box, enter a channel group name.
Setting Item
Name
3) Clicking [OK] adds the channel group.
Creates a channel group.
Moves the selected channel group up by one.
Moves the selected channel group down by one.
If a channel is being selected, the channel is deleted from the
registered group. If a channel group is being selected, the group or a
part of the channels in the group is deleted.
Changes the selected channel group name.
Adds the channel selected in the channel list on the right to the
channel group.
Enter a channel group name.
<Input range> Half-width63 characters (Full-width 20 characters,
more or less)
<Maximum Group Count> Up to 20 groups
Description
Description
7-36
Advertisement
Table of Contents
