Table of Contents
Advertisement
11. Safe Mode
4) Start up a Web browser, enter the following URL, and press Enter.
http://192.168.200.200/
The Web UI screen of the safe mode appears.
You do not need to log in (enter ID and password).
The password "admin" is an online connection password of EQ100 upon factory shipment or
after initialization. If the login password for the Web UI has been changed in [Advanced Setting]
- [System Setting] - [Maintenance Screen Password Setting] of EQ-Manager, specify the new
password.
You can start up the safe mode while connecting to the EQ100 sub-LAN port.
See below for the settings.
IP Address
Subnet Mask
Default Gateway
Precautions for
Correct Use
- For "***", specify a number from 2 to 200 or from 202 to 254. You cannot use 0 and 25.
Specify an IP address that is not used for EQ100 itself and measurement devices connected
to the LAN connection port of EQ100.
- To connect a computer and EQ100 under the safe mode, make sure that the computer's LAN
connection port should be configured so as to be connectable to 192.168.200.200 (or
192.168.100.201 for sub-LAN connection port).
EQ-Manager Setting Screen
192.168.100.***
255.255.255.0
Setting not required
11-2
Advertisement
Table of Contents
