Omron EQ100-E User Manual page 69

Sensor network server
Table of Contents

Advertisement

5. Installation and Wiring
4) Remove the caution label for the memory backup battery attached on the top of the EQ100.
Precautions for
Correct Use
- Before using the product, always remove the caution label for the memory backup battery
attached on the top of the EQ100.
* Battery Life
- The battery life is around 5 years (at ambient temperature of 23°C), largely depending on the
operating conditions. This life value is only a reference one and is not guaranteed.
- When a low battery is detected, the device alarm indicator on the EQ100 front end flashes.
Replace the battery within two weeks from the low battery detection.
- Turn off the power before replacing the battery. Attach a new battery within five minutes from
turning off the power. Otherwise the stored data may become indefinite.
* Purchase of New Battery
- For purchase of a new memory backup battery, contact our sales representative.
Product Name
Model
Product Code
Precautions for
Correct Use
- After mounting on a DIN rail or attaching with screws, the EQ100 top cover cannot be opened.
Always attach the battery before mounting.
Precautions
- If you do not use the product for a long period of time, remove the battery. This should prevent
battery consumption and a failure due to leak.
A lithium battery is used for memory backup. Do not
disassemble, apply pressure to deformation, overheat to more
than 100°C, and/or burn it.
Otherwise serious injury may occasionally occur due to fire
and/or explosion.
: Memory backup battery
: CP1W-BAT01
: CP1W-0101E
WARNING
Caution Label of Battery Connection
Cover
5-3

Advertisement

Table of Contents
loading

Table of Contents