Table of Contents
Advertisement
7. EQ100 Settings
■Batch Registration
Multiple measurement devices can be registered together in the [Add Measurement Device]
dialog box.
This function, however, configures the same settings for device address and others. You need
to edit the settings after the batch registration.
In this section, assume batch registration of KM100 as an example.
1) In the [Add Measurement Device] dialog box, click the [Batch Registration] button.
2) In the [Batch Registration] dialog box, enter the details.
Setting Item
Prefix
In the Prefix field, a device name entered in the [Add Device] dialog box
appears. If not entered, enter a prefix here.
For example, if you enter a prefix name as "1st floor KM100_" and 5
devices as the number of devices to register, the devices are registered
as names with a serial number added to the end, as "1st floor KM100_1",
"1st floor KM100_2", ... "1st floor KM100_5".
<Input range> Half-width63 characters (Full-width 20 characters, more or
less)
Description
7-17
Advertisement
Table of Contents
