Table of Contents
Advertisement
7. EQ100 Settings
3) In the screen shown below, configure the LAN connection port to use.
Clicking the [Network Setting (LAN)] or [Network Setting (sub-LAN)] button displays the
respective dialog box, in which configure the settings.
Setting Item
EQ100 Network Setting
(LAN)
EQ100 Network Setting
(sub-LAN)
Precautions for
Correct Use
- Do not configure the LAN and sub-LAN to the same network segment. (Addresses that are
masked by the subnet mask must be different)
Set the LAN connection port of EQ100.
- IP Address: Enter an IP address.
- Subnet Mask: Specify the value based on the network
environment.
- Default Gateway: Specify the value based on the network
environment.
- DNS: Specify the value based on the network environment.
*Initial Value
IP Address: 192.168.200.200
Subnet Mask: 255.255.255.0
Default Gateway: None
DNS: None
Set the sub-LAN connection port of EQ100.
- IP Address: Enter an IP address.
- Subnet Mask: Specify the value based on the network
environment.
*Initial Value
IP Address: 192,168,100,201
Subnet Mask: 255.255.255.0
Description
7-55
Advertisement
Table of Contents
