Table of Contents
Advertisement
7. EQ100 Settings
■Channel Batch-Edit
You can view a list of multiple channels and edit the channel names together.
1) On the bottom of the screen, click the [Channel Batch-Edit] button.
2) Click the field of the channel you want to edit, and edit the item directly.
You can edit a channel name only. You cannot edit a shaded item.
You can edit a
channel name
3) Click [OK].
■Enabling/Disabling Logging
You can stop logging from a measurement device while keeping the channel registration as it is.
1) In the [Channel Registration] screen, change the setting of enabling/disabling [Logging].
Setting Item
Logging
En (Enable): Logging from the channel is available.
Dis (Disable): Logging is not done from the channel even if the logging is
Description
started.
7-26
Advertisement
Table of Contents
