Table of Contents
Advertisement
7. EQ100 Settings
3) In the [FTP Server Setting] dialog box, select the [Enable FTP Server] check box and
configure [Account] and [Password].
Setting Item
Enable FTP Server
Account
Password
4) Click [OK].
Reference
- Collected data can be taken out after collecting was started using the following steps.
■Connecting from FTP Client
1) Connect EQ100 and a computer via LAN.
2) Use Internet Explorer or other Web browser, or FTP client software, to specify
"ftp://<EQ100 IP address>/" as the URL.
In case of factory shipment setting, enter the following URL:
- Connecting to EQ100 LAN port: ftp://192.168.200.200/
- Connecting to EQ100 sub-LAN port: ftp://192.168.100.201/
3) Enter the account and password.
4) Content of the EQ100 internal memory is displayed.
5) As with folder manipulation, drag and drop a collected data file/event log file to fetch.
Specify whether the FTP server should be enabled or not.
Specify an account to connect to the FTP server.
<Input Range> Half-width63 characters (initial value: ftp)
Specify a password to connect to the FTP server.
<Input Range> Half-width 63 characters (initial value:
ftppassword)
Description
7-64
Advertisement
Table of Contents
