Omron EQ100-E User Manual page 53

2. Specifications
Reference
- A measurement device that can log measured data by itself, e.g. KM100 and ZN-KMX21, logs
measured data with its internal clock. EQ100 collects measurement data using its internal
clock from measurement devices.
Collecting of measured data by a measurement device itself and EQ100 are separately
performed. The measured data of them may not be the same due to a difference between the
measurement timings.
■Device Type and Maximum Measurement Channels
The maximum number of measurement channels of EQ100 is 500, including all measurement
devices and operation channels.
Under the limitation, shown below is a list of the maximum numbers of measurement channels
for measurement devices:
Connection Device
Method Type
RS- - Power Monitor
RS-485-
485 Connected - Digital Panel Meter
Device
- Temperature Controller
- Portable Power Monitor
LAN
LAN-
- Air Thermo Station
Connected
Device - Differential Pressure
- Air Particle Sensor
- Power Station
- Air Flow Station
Wireless - Wireless Unit Slave
Device
Unit
- Air Thermo Sensor
- Illumination Sensor
- Air Thermo Illumination
- CO
- Wireless Unit Slave
PLC - CJ Series
Pulse Input -
Operation (A channel obtained by an
Channel process operating a
measurement channel)
*1: The number of wireless device units is counted as the number of the slave units, regardless
of the number of LAN-connected master units and relay units.
Device Name
Station
(CompoWay/F)
Sensor
Sensor
2
(Pulse Count)
Maximum Measurement
Maximum
Collecting
Connections
Interval:
1 minute
124 devices 160 channels
(31 devices/
(40 channels/
port x 4 ports)
port)
100 devices 500 channels 500 channels
30 devices 40 channels
(*1)
(14 devices/
slave)
30 devices Limitless in the channel
(*1) number (only the number of
devices to be connected is
limited)
10 devices 500 channels 500 channels
1 input 1 channel
- 100 channels 100 channels
Channels
Collecting
Interval:
5 minutes or
longer
500 channels
(200 channels/
port)
120 channels
1 channel
2-22