Table of Contents
Advertisement
7. EQ100 Settings
<Others (other than PLC/EQ-100 connected to General-Purpose Input terminals)>
Select the [Select] check box of the channel you want to register. The channels that have
been registered already are shaded with their check boxes being selected.
Registered
Channel
Registered
Channel
Setting Item
Select
Channel Name
Channel Address
Data Type
Edit
Destination Group
to Add
4) Clicking [OK] registers the channel with the specified configuration.
5) To add more channels, repeat the steps from 1) to 3).
Select a channel you want to register for collecting.
Right-clicking shows the following menu, in which [Select], [Cancel],
and [Select the default channel] are available.
A channel name appears. To change, press the [Edit] button.
A channel address appears.
A channel type appears.
Clicking this displays a dialog box to change the channel name and
input parameter (only those available).
If the [Destination Group to Add] check box is selected, channels can
be registered to a specified group at the same time.
To use this function, first register a group.
For registration, see "7.4.7. Group Registration".
Note that performing the registration without performing group
registration registers to a default "group".
Description
7-23
Advertisement
Table of Contents
