Table of Contents
Advertisement
1. Overview of EQ100
1.4.1.3.
Pulse Measurement Function
This function allows measurement of pulse count from a pulse-output measurement device
connected to the general-purpose input terminal of EQ100.
EQ100
Reference
- EQ100 has a conversion function from pulse count to actual measured value, which allows
converted measured value to save instead of the pulse count.
1.4.1.4.
Measured Data Collecting/Storage Function
This function allows collecting and temporary storage of measured data from devices into
internal memory.
The internal memory is nonvolatile and can keep data upon blackout. Old measured data are
sequentially overwritten when the internal memory is full.
EQ100
Save
Internal Memory
Precautions for
Correct Use
- The retention period of data convergence in the EQ100's internal memory is one week
(collected data older data than one week are overwritten by newly collected data from the
oldest one).
- To keep collected data older than one week in EQ100, use an SD card to save.
- Data output will get unavailable when the SD card has no free space. In such a case, you
occasionally need to move the output files on the SD card to other places such as a computer
or use a new SD card.
Pulse
Collecting
Measurement
Device
Measurement
Device
1-7
Advertisement
Table of Contents
