Table of Contents
Advertisement
7. EQ100 Settings
5) On the toolbar, click [Logger] - [Online].
6) In the [Online Host Device] dialog box, check the displayed IP address and click [OK].
If the IP address is different from the one shown below, edit it.
EQ100 IP Address upon Factory Shipment: 192.168.200.200
7) When online connection is done, the status bar indicates [Online].
8) Write the EQ project to EQ100.
On the toolbar, click [Logger] - [Write Setting].
9) If a password is designated for EQ-Manager, a confirmation dialog box appears as shown
below.
Enter the password and click [OK].
7-72
Advertisement
Table of Contents
