Table of Contents
Advertisement
7. EQ100 Settings
5) On the Web UI screen, select [Maintenance] - [Update].
6) Click the [Browse] button of [Read EQ Project].
The EQ project selection screen appears.
7) Select an EQ project file to write to EQ100.
8) Click the [Update] button of [Read EQ Project].
9) The EQ project is written to EQ100.
When writing is completed, a message " Completed to write the setting. " appears. Click [OK].
When a message " Please restart." appears, go to (10).
Reference
- The " Please restart." message appears if the change of the setting requires a restart. For
example, a change of network setup such as an IP address requires a restart.
10) When a message "Restart it" appears in the step 9, restart EQ100.
The EQ100 IP address has been changed.
11) Change the computer's IP address back.
7-75
Advertisement
Table of Contents
