Omron EQ100-E User Manual page 10

Term
Monitoring Alarm
Monitoring Alarm Email
Device Alarm
Device Alarm Email
Logging
Log Data
Event Log
Event Log File
Summary DB
Collecting Interval
Collected Data
Collected Data File
Communication Test
Periodic Report
General-Purpose Input
General-Purpose
Output
Differential Processing
CompoWay/F
Web UI Function
EQ-Viewer
EQ-Manager
EQ-GraphViewer
EQ-ServerService
Project
EQ Project
EQ Server Project
A function that detects and reports a value exceeding a control
value.
An email automatically sent upon a monitoring alarm event.
A function that reports an instrument failure, setup/status, device,
communications, and/or monitoring process of EQ100.
An email automatically sent upon a device alarm event.
To store data with the time of saving for each measurement interval.
Collected data.
A generic name for monitoring alarm, device alarm, and internal
event.
A file that saves an event log.
A DB (database) that stores collected and summarized data and
that is managed by the EQ server.
An interval for EQ100 to collect data from a measurement device.
Data that is collected and saved by a collecting device or software
(EQ-ServerService) in a certain interval.
A file in a CSV format containing collected data output.
A status to check communications by continuous execution of data
collecting from a measurement/collecting device. This does not
perform logging of collected data.
A function to send an email with content configured by a user
beforehand on a specified time for alive monitoring.
A contact input to assign a function. In case of EQ100, it is assigned
to the pulse input function.
A contact output to assign a function. In case of EQ100, it is used
for the monitoring alarm contact output.
A process that stores a measured value collected from a
measurement device and calculates a difference with the previous
measured value. It is a process for integrated values such as
electric energy and integrated flow rate.
OMRON's dedicated serial communications protocol supported by
OMRON's component devices.
A function to view data incorporated into EQ100. It allows a user to
view EQ100 status and collected data graph and perform
maintenance through a Web browser on a computer.
Software to configure EQ100 settings and view collected data
graph. It consists of EQ-Manager, EQ-ServerService, and
EQ-GraphViewer.
Software to configure EQ100 and EQ server settings and perform
operation management.
Software to view and analyze a graph of collected data.
Software to collect and provide data in the background as a
Windows service.
A file created by EQ-Manager to store configuration information
required for operation of EQ100 and EQ server.
A project that describes operation settings of EQ100. It is created
using EQ-Manager.
A project that describes operation settings of EQ server. It is
created using EQ-Manager. It must be created if EQ-GraphViewer
Description
8