Table of Contents
Advertisement
2. Specifications
Item
Contact
Function
Output
Email
Function
Notification
Maintenance
Communication Test Communications with connected measurement devices
Function
Clock Setup
General-Purpose
Output
FTP Test Transfer
Firmware Update
An alarm can be outputted to a general-purpose output
terminal when a monitoring condition is met.
- Monitoring alarm notification email: Sent upon a
monitoring alarm occurrence.
- Device alarm notification email: Sent upon an occurrence
of an instrument failure, setup/status, device,
communications, and/or monitoring process of EQ100.
- Periodic alarm: Sent at a specified hour with a body
configured by a user.
- Test email: Sent by a Web UI operation to check the
configured email notification of the communications
status with the SMTP server.
* The SMTP function with email transmission
authentication supports:
・POP before SMTP
・POP before SMTP (APOP)
・SMTP AUTH PLAIN
are continuously performed to check stability of the
communications with measurement devices. Collected
data are not saved.
The time is configured for the built-in clock of the EQ100.
The general-purpose output terminals are operated
between on and off.
FTP transfer from the EQ100 to the FTP server is tested.
The firmware of the EQ100 is updated. The firmware can
be updated by any of the following operations:
- Web UI operation to transfer the firmware from a
computer to EQ100 to update.
- Attaching an SD card containing the firmware to update.
- Safe mode function to transfer the firmware from a
computer to EQ100 to update.
Details
2-18
Advertisement
Table of Contents
