Table of Contents
Advertisement
7. EQ100 Settings
■Creating Basic Unit Operation Channel
1) In the setting menu, click [Operation Channel Setting].
2) Click [Add].
3) In the [Create Operation Channel] dialog box, click the [Basic Unit Operation Channel] tab
and configure the settings.
Setting Item
Channel Name
Enter a name of a new basic unit operation channel to create.
<Input range> Half-width63 characters (Full-width 20 characters, more or
less)
Data Type
Select a data type for the basic unit operation channel.
Data as
Select an existing channel as a numerator of the basic unit operation
numerator of
channel.
basic unit
Measurement channels that configure a denominator and a numerator
must be instantaneous values for both or integrated values for both only.
Data as
Select an existing channel as a denominator of the basic unit operation
denominator of
channel.
basic unit
Measurement channels that configure a denominator and a numerator
must be instantaneous values for both or integrated values for both only.
Destination
Select a group to which the created basic unit operation channel is
Group to Add
added.
4) Click [OK].
Description
7-32
Advertisement
Table of Contents
