Omron EQ100-E User Manual page 64

4. Basic Operation Steps
[Step 2] Writing EQ Server Project
1) If EQ-Manager and EQ-ServerService are not on the same computer, connect a computer
for setup and the EQ server (a computer with EQ-ServerService installed) via LAN.
2) Connect online from EQ-Manager to the EQ server:
In the [Logger] menu, select [Online]
3) Write the EQ server project from EQ-Manager to EQ server:
In the [Logger] menu, select [Write Settings]
"7. EQ100 Settings", "EQ-Viewer User's Manual"
Refer to
[Step 3] Communication Test between EQ Server and EQ100
1) Connect a computer (EQ server) to EQ100 via LAN.
2) Perform communication test between the EQ server and EQ100 using the following
operation:
In the EQ-Manager [Logger] menu, select [Online] - [Start Test]
"8. Communication Test and Collecting Start", "EQ-Viewer User's
Refer to
Manual"
[Step 4] Starting Collecting from EQ100 to EQ Server
Start data collecting from EQ100 to the EQ server using the following operation:
- Use EQ-Manager to open the EQ server project, and in the [Logger] menu select [Online] -
[Start Logging]
"EQ-Viewer User's Manual"
Refer to
[Step 5] Viewing/Analyzing Graph on EQ-GraphViewer
(1) Start up EQ-GraphViewer
(2) Connect EQ-GraphViewer to the EQ server
In the [Connect Server] dialog box, specify the EQ server
(3) Select a channel group to view a graph
(4) Configure settings such as a graph type, view duration, and summary interval based on
the purpose
"EQ-Viewer User's Manual"
Refer to
4-5