Table of Contents
Advertisement
7. EQ100 Settings
■Deleting Control Value
Select the [Select] check box of the channel you want to delete, and click [Delete].
The control value setting is deleted.
Reference
- You can configure in on the Web UI screen as well. For details, see "9.4. Monitoring Screen".
7.5.6.
Notification Setting
■Function
For notification setting, select an email destination group for the following two notification
emails.
Before configuring periodic report setting, you must configure the destination group setting (see
"7.5.8. Destination Setting").
Item
Monitoring
A measured data is over the upper or under the lower limit of the control value
Alarm
setting.
Device Alarm An instrument failure, setup/status, device, communications, and/or
monitoring process of EQ100 occurred.
■Editing Destination Group
1) In the setting menu, click [Notification Setting].
2) Set [En] for the [En/Dis] (Enable/Disable) of monitoring alarm or device alarm, and click the
[Edit] button.
3) In the [Notification Setting] dialog box, select a destination group.
4) Click [OK].
Transmission Condition
7-43
Advertisement
Table of Contents
