KYMCO MX’er 125 Service Manual page 83

7. CYLINDER HEAD/VALVES
washers.
*
Diagonally loosen the cylinder head nuts in 2
or 3 times.
Remove the camshaft holder and dowel pins.
Remove the camshaft gear from the cam chain
and remove the camshaft.
CAMSHAFT INSPECTION
Check each cam lobe for wear or damage.
Measure the cam lobe height.
Service Limits:
IN : 31.40mm replace if below
EX: 31.13mm replace if below
Nut
7-5
Washer
Camshaft Holder
Camshaft
Cam Chain
Check each camshaft bearing for play or
MX'er SYSTEM
Dowel Pins
Camshaft Gear