KYMCO MX’er 125 Service Manual page 125

10
. FINAL REDUCTION/
TRANSMISSION SYSTEM
Tighten the crankcase attaching bolts.
Torque: 0.8 1.2kgf-m
Tighten the left crankcase attaching bolt.
Install the shaft gear, balance gear, oil pump,
starter clutch and flywheel.
Install and tighten the right case cover bolt.
Install the shift gear spindle.
Install the cylinder.
Specified Gear Oil:
KYMCO SIGMA GEAR OIL 90#
Oil Capacity:
At disassembly : 0.4 liter
At change
Install and tighten the oil check bolt.
Torque: 0.8 1.2kgf-m
10-9
: 0.2 liter
Bolts
Bolts
Cylinder
Oil Filler Bolt
Shift Gear Spindle
MX'er SYSTEM
Right Case Cover