KYMCO MX’er 125 Service Manual page 124

10
. FINAL REDUCTION/
TRANSMISSION SYSTEM
and install the transmission fork guide pin into the
shift cam groove.
Install the transmission fork shaft into the left
crankcase.
Install the change gear shaft by aligning the punch
mark between with the punch mark of the shift
cam gear.
Install shift cam stopper, spring, washer and plug
and tighten the plug.
Transmission Fork
Shift cam
Transmission Fork Shaft
Mark
Install the dowel pins and a new gasket onto the
right crankcase.
MX'er SYSTEM
Plug
10-8