KYMCO MX’er 125 Service Manual page 159

13
. REAR WHEEL/SWING ARM/
HYDRAULIC BRAKE
Lateral: 2.0mm
Replace wheel or check bearing play if out of
specification.
Remove two nuts of the rear axle (outer and
inner).
Remove five bolts attaching left and right lower
guard.
Loosen the lock nut for the adjuster of the drive
chain slack.
13-5
Outer Nut
Bolts
Right Lower Guard
Adjuster
Loosen four bolts attaching rear axle hub.
MX'er SYSTEM
Inner Nut
Bolts
Left Lower Guard
Lock Nut