KYMCO MX’er 125 Service Manual page 11

1
. GENERAL INFORMATION
n Route harnesses so they are neither pulled
tight nor have excessive slack.
n Protect wires and harnesses with electrical
tape or tube if they contact a sharp edge or
corner.
n When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
n Do not break the sheath of wire.
n If a wire or harness is with a broken sheath,
repair by wrapping it with protective tape or
replace it.
n When installing other parts, do not press or
squeeze the wires.
1-9
MX'er SYSTEM
Do not pull
too tight!
Do not press
or squeeze
the wire.