KYMCO MX’er 125 Service Manual page 104

9. DRIVE AND DRIVEN PULLEYS
INSPECTION
Check the drive belt for cracks, separation or
abnormal or excessive wear.
Measure the drive belt width.
Service Limit: 17.0mm replace if below
*
Use specified genuine parts for
replace-ment.
Remove the movable drive face assembly.
Remove the drive pulley collar.
DISASSEMBLY
Remove the ramp plate.
Remove the weight rollers.
MX'er SYSTEM
Drive Pulley Collar
Movable Drive Face Assembly
Ramp Plate
Weight Rollers
9-4