11
.
CRANKSCASE/CRANKSHAFT/
BALANCE SHAFT
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• This section covers crankcase separation to service the crankshaft. The engine must be removed for
this operation.
• The following parts must be removed before separating the crankcase.
−Cylinder head ( ð Section 7)
−Cylinder/piston ( ð Section 8)
−Drive and driven pulleys ( ð Section 9)
−A.C. generator ( ð Section 4)
−Carburetor/air cleaner ( ð Section 5)
−Starter motor ( ð Section 16)
−Oil pump ( ð Section 4)
SPECIFICATIONS
Connecting rod big end side clearance
Crankshaft
Connecting rod big end radial clearance
Run out
TORQUE VALUES
Crankcase bolt
Cam chain tensioner slipper bolt
Cam chain cover bolt
TROUBLESHOOTING
Excessive engine noise
Excessive bearing play
Item
0.8 1.2kgf-m
0.8 1.2kgf-m
0.8 1.2kgf-m
MX'er SYSTEM
Standard (mm)
Service Limit (mm)
0.10 0.35
0 0.008
0.55
0.05
0.10
11-2