KYMCO MX’er 125 Service Manual page 147

12
. FRONT WHEEL/FRONT BRAKE/FRONT
SUSPENSION/STEERING SYSTEM
Remove the handlebar cover with main switch.
Disconnect the front brake cables from the
brake lever, rear brake cable from the brake
lever and brake switch from the bracket of the
brake lever.
*
Disconnect the brake switch from the
bracket of the brake lever while pushing
the hook of the brake switch with a
driver.
Remove the two screws to remove the cover of
the throttle housing.
Disconnect the throttle cable from the lever.
Handlebar Cover
12-13
Main Switch Lead
Front Brake Cables
Hook
Cover
Screws
Remove the two screws and remove the
handlebar switch.
MX'er SYSTEM
Brake Switch
Rear Brake Cable
Throttle Housing