KYMCO MX’er 125 Service Manual page 45

3
. INSPECTION/ADJUSTMENT
Remove the oil dipstick and check the oil level
with the oil dipstick.
If the level is near the lower level, fill to the
upper level with the specified engine oil.
OIL CHANGE
*
The engine oil will drain more easily while
the engine is warm.
Remove the oil drain plug bolt located on the
bottom of the engine to drain the engine oil
thoroughly.
After the oil has been completely drained,
Install the oil drain plug bolt.
Torque: 2..0 3.0kgf-m
Recommended Oil:
FINAL REDUCTION GEAR OIL
*
Place the motorcycle on level ground for oil
level check.
Recommended Oil: GEAR OIL SAE90#
SAE30#
Lower Level
Oil Dipstick
Oil Filler Bolt
GEAR OIL CHANGE
Remove the oil filler bolt.
Removes the oil drains bolt and drain the oil
thoroughly.
Install the oil drain bolt.
Torque: 0.8 1.2kgf-m
*
Make sure that the sealing washer is in good
condition.
MX'er SYSTEM
Upper Level
Oil Filter Screen Cap
oil drain plug bolt
3-8