KYMCO MX’er 125 Service Manual page 7

1
. GENERAL INFORMATION
n Apply or add designated greases and
lubricants to the specified lubrication points.
n After reassembly, check all parts for proper
tightening and operation.
n When two persons work together, pay
attention to the mutual working safety.
n Disconnect the battery negative (-) terminal
before operation.
n When using a spanner or other tools, make
sure not to damage the motorcycle surface.
n After operation, check all connecting points,
fasteners, and lines for proper connection
and installation.
n When connecting the battery, the positive (+)
terminal must be connected first.
n After connection, apply grease to the battery
terminals.
n Terminal caps shall be installed securely.
1-5
MX'er SYSTEM