KYMCO MX’er 125 Service Manual page 168

13
. REAR WHEEL/SWING ARM/
HYDRAULIC BRAKE
Check the swing arm vertical movement by
moving it up and down.
If vertical movement is tight, binding or rough,
check the inner collar, bearing, bushing and
thrust cover, or adjust the shim.
Remove the nut and pivot shaft, then remove
swing arm.
Remove the thrust covers.
Swing arm
Thrust Covers
INSPECTION
Inspect the shock absorber rod.
Replace the shock absorber assembly if bends
or damage.
Inspect the shock absorber.
Replace the shock absorber assembly if oil
leaks
Inspect the spring.
Replace the shock absorber assembly if fatigue.
MX'er SYSTEM
13-14