KYMCO MX’er 125 Service Manual page 162

13
. REAR WHEEL/SWING ARM/
HYDRAULIC BRAKE
INSPECTION
Replace if the wheel hub is cracks or damage.
Replace if splines of the wheel hub is wear or
damage.
Replace if the rear axle is scratched
(excessively) or damage.
Replace if splines and threads of the rear axle is
wear or damage.
Measure the rear axle run out.
Service limit: less than 1.5mm
Replace if it is out of specification.
*
Do not attempt to straighten a bent axle.
bolts
Wheel Hub
DRIVE CHAIN INSPECTION
Remove rear wheels, rear hub (with rear axle)
and swing arm.
Refer to the "REAR WHEEL REMOVAL"
and "SWING ARM REMOVAL" section.
Remove right foot board.
Remove the drive sprocket.
MX'er SYSTEM
Splines
13-8