KYMCO MX’er 125 Service Manual page 148

12
. FRONT WHEEL/FRONT BRAKE/FRONT
SUSPENSION/STEERING SYSTEM
Remove the two bolts and remove headlight
unit.
Remove the four handlebar holder bolts and
remove the handlebar.
Remove the cotter pins and nuts attaching the
tie-rods, then remove tie-rods.
Remove the cotter pin and nut attaching the
steering column, then remove steering column
and collar.
Screws Handlebar Switch
Bolts
Bolts
Cotter Pin
Nut
Tie-rod
Cotter Pin
Remove the two bolts to remove the cable
holder, steering bracket, collars and steering
column.
MX'er SYSTEM
Headlight Unit
Handlebar
Cotter Pin
Nut
Nut
12-14