KYMCO MX’er 125 Service Manual page 35

2
. FRAME COVERS/EXHAUST MUFFLER
Remove right rear fender under bolt.
Remove the right rear fender.
FLOOR BOARD COVER REMOVAL
Remove the four bolts on the floorboard cover.
Remove the floorboard cover.
FRONT COVERS REMOVAL
Remove the two screws on the front cover.
Remove the left and right front fender under
bolt.
Remove the front cover.
FRONT FENDER REMOVAL
Remove the left and right front fender under
bolt.
Remove screws attaching the left and right front
fender.
Remove the left and right front fender.
*
During removal, be careful not to damage
the joint claws.
MX'er SYSTEM
Bolt
Floor Board Cover
Bolts
Front Cover
Screws
Bolt
2-4