Figure 4-16.
SCSI ID Numbers
for Wide-Ultra SCSI-3
There are several possible numbering schemes depending on whether you are
using 1-inch height drives, 1.6-inch height drives, or a simplex controller. The
following figures illustrate the simplex mode scenarios.
Figure 4-17.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
2
1
Installing a Wide-Ultra SCSI-3 drive
3
6
2
5
1
0
4
SCSI ID numbers - single SCSI channel (simplex mode)
with 1-inch drives
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
4-21