Rack Stability - Compaq ProLiant 5500 Setup And Installation Manual

xii About This Guide

Rack Stability

Any surface or area of the equipment marked with these
symbols indicates the presence of a hot surface or hot
component. If this surface is contacted, the potential for
injury exists.
WARNING: To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
WARNING:
the equipment, a minimum of two people MUST lift the server
into the rack. The rack-mountable server weighs in excess of
92 LB (41.8 kg.). If the unit is to be loaded above chest level, a
third person must assist in aligning the rails while the other two
support the unit.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
WARNING: Power Supplies or Systems
marked with these symbols indicate the
equipment is supplied by multiple sources of
power.
WARNING: To reduce the risk of injury from
electrical shock, remove all power cords to
completely disconnect power from the system.
To reduce the risk of personal injury or damage to