Figure 7-8. Example 1: Connection diagram
Example 2:
Using One Optional SMART-2 Controller for
Hard Drives, Integrated SCSI Port 1 for
Removable Media Bay
1.
Remove the installed SCSI cable (199606-007) from Integrated SCSI
Port 1 and SCSI Input 0 of simplex board.
2.
Install the 19-inch point-to-point non-terminated SCSI cable (199606-
007) supplied with the cable option kit (306585-B21) from the optional
SCSI board connector to the SCSI Input 0 connector of the simplex
board.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
7-15