Compaq ProLiant 5500 Setup And Installation Manual page 129

7-22 Cabling for Wide-Ultra SCSI-3
SCSI Cable Usage Matrix for Duplex Mode
Controller
Integrated
Controller Port 2
See Note 5.
Hot-Plug SCSI Hard
Drives in Internal
Drive Cage
Connect 19-inch
point-to-point
non-terminated
SCSI cable
(199606-007)
from SCSI Port 2
to SCSI Input 1 of
duplex board.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Continued
2/4 DAT Drive 35/70 DLT Drive
4/8 DAT Drive
Internal TurboDAT
Autoloader
8X SCSI CD-ROM
4/16 TurboDAT
15/30 DLT Drive
Connect 22-inch
3-device
terminated SCSI
(199616-010)
from duplex
enabler board to
the removable
media bay
devices.
Use 50-to-68 pin
adapter (199618-
001) if needed.
See Note 2.
Connect 22-inch
3-device
terminated SCSI
(199616-010)
from duplex
enabler board to
the removable
media bay
devices.
See Note 2.
continued