Compaq ProLiant 5500 Setup And Installation Manual page 55

1. Pull the slide rails forward from the mounting brackets.
2. Carefully align the server rails with the slide rails of rack and slide the
server into the rack.
CAUTION:
sliding the server rails into the slide rails. Tilting the server up or
down could result in damage to the rails.
Figure 3-14. Loading the rack server
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Be sure to keep the server parallel to the floor when
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
3-23