Regulatory Compliance Notices; Regulatory Compliance Identification Numbers; Federal Communications Commission Notice - Compaq ProLiant 5500 Setup And Installation Manual

Appendix A

Regulatory Compliance Notices

Regulatory Compliance
Identification Numbers
For the purpose of regulatory compliance certifications and identification, your
Compaq ProLiant 5500 Pentium II Xeon Processor-based Server is assigned a
Compaq Series Number. The Compaq Series number for this product is: Series
ES1003. The server's Series Number can be found on the product label, along
with the required approval markings and information. See "Regulatory
Compliance Label Location" at the end of this appendix for the location of the
label on this product. When requesting certification information for this product
always refer to this Series Number. This series number should not be confused
with the marketing name or model number for your server.
Federal Communications
Commission Notice
Part 15 of the Federal Communications Commission (FCC) Rules and
Regulations has established Radio Frequency (RF) emission limits to provide
an interference-free radio frequency spectrum. Many electronic devices,
including computers, generate RF energy incidental to their intended function
and are, therefore, covered by these rules. These rules place computers and
related peripheral devices into two classes, A and B, depending upon their
intended installation. Class A devices are those that may reasonably be
expected to be installed in a business or commercial environment. Class B
devices are those that may reasonably be expected to be installed in a
residential environment (i.e., personal computers). The FCC requires devices in
both classes to bear a label indicating the interference potential of the device as
well as additional operating instructions for the user.
The rating label on the device shows which class (A or B) the equipment falls
into. Class B devices have an FCC logo or FCC ID on the label. Class A
devices do not have an FCC logo or FCC ID on the label. Once the class of the
device is determined, refer to the following corresponding statement.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
A-1