Compliance with International Regulations
All Compaq systems equipped with laser devices comply with appropriate
safety standards including IEC 825.
Laser Product Label
The following label or equivalent is located on the surface of the Compaq
supplied laser device.
Laser Information
Laser Type
Wave Length
Divergence Angle
Output Power
Polarization
Numerical Aperture
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
This label indicates that the product is
classified as a CLASS 1 LASER
PRODUCT. This label appears on a
laser device installed in your product.
Semiconductor GaAIAs
780 nm +/- 35 nm
53.5 degrees +/- 0.5 degrees
Less than 0.2 mW or 10,869 W·m-2 sr-1
Circular 0.25
0.45 inches +/- 0.04 inches
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
A-7